• 加入收藏設為首頁
  • bet9九州备用网站首頁
  • bet9九州备用网站簡介

  • 新聞動態

  • 產品展示

  • 聯係bet9九州备用网站

  • DX係列訂箱機
    產品名稱

    DX係列訂箱機

    產品描述

    DX係列訂箱機係結合國內外同類產品優點♤精心設計而成♤具有外觀新穎♤動作輕快♤運轉平穩♤訂箱牢固♤使用壽命長等優點⊙

    詳細信息

    DX係列訂箱機係結合國內外同類產品優點♤精心設計而成♤具有外觀新穎♤動作輕快♤運轉平穩♤訂箱牢固♤使用壽命長等優點⊙

    釘箱機改進了機頭結構♤它采用電磁離合控製刹車♤具有打釘速度快♤製動靈活♤噪音小等優點⊙適用於紙箱廠釘製瓦楞紙箱及紙盒之用⊙能同時按45度傾斜進行單線或雙線連續或間斷地裝釘大、中、小型的紙箱⊙由手工控製釘在搭接頭上的位置♤改為機械可調式控位板控拉⊙由原單臂式改為龍門式而滿足了箱片單一方向的運行⊙為與紙板生產線配套起到一定的準備作用♤確保尾釘及釘距的位置♤滿足出口用紙箱釘箱的各種標準要求⊙這類機器又分為單片釘箱機和雙片釘箱機⊙

    DX series binding machine system combines the advantages of similar products at home and abroad, carefully designed, with a novel appearance, light action, smooth operation, set the box firmly, long service life, etc..

    Nail box machine to improve the structure of the nose, it uses electromagnetic clutch to control the brake, with a fast speed, brake flexible, low noise, etc.. For the use of cardboard box factory nail system for corrugated boxes and cartons. At the same time according to the 45 degree tilt of single or double line continuous or intermittent loading of large medium and small carton. The position of the overlapping head is controlled by the hand, and the machine can be controlled to be controlled by the adjustable control board. The original single arm type to Longmen and meet the single direction of the operation box. To prepare and cardboard production line supporting, to ensure that the tail nail and nail from the position, meet the export with nail carton box of a variety of standards. This machine is divided into: single nail box machine and double plate nail box machine.

    現有釘箱機存在不足

    1、人工遞送箱片釘距質量不穩定⊙

    2、易出釘傷事故⊙

    3、因設備型號和內部結構不同♤機頭不能互換(有時同廠同型號機頭也不能互換)♤這很不利於維修⊙

    4、腳控離合尾釘位置不準⊙

    5、釘箱要多次重複同樣、單調的動作♤工人勞動強度大且生產效率偏低⊙

    6、機頭與氈座空隙決定著可釘紙板厚度⊙由於所釘厚度不能變♤紙板再薄也要走完全程♤紙板稍厚便感"心有餘而力不足"♤明顯影響釘箱質量和速度⊙

    DX係列訂箱機技術參數

    Model Stapling Speed Stapling Thickness  Stretching Length of the holding Arm Exterior Dimension Weight
    DX-600 250 s/min 3/5   ply 600 mm 1100x600x1760 300㎏
    DX-900 250 s/min 3/5/7  ply 900 mm 1400x600x1760 400㎏
    DX-1200 250 s/min 3/5/7  ply 1200mm 1700x700x1820 600㎏
    DX-1400 250 s/min 3/5/7  ply 1400mm 1900x700x1820 800㎏
    DX-1800 250 s/min 3/5/7  ply 1800mm 2300x700x1820 1000㎏